Ruby Tipped Wire Guide Nozzle (RC0630-3-1465) Coil Winding Nozzle

Function: Protect Enameled-Wire
Material: Ruby on Tip, Ceramic in Wire Inlet, Stainless Steel
Application: CNC Automatic Winding Machine
Polish: Precision Grinding
Roughness of R Place: Ra0.025
Roughness of Bore: Ra0.1
Customization:

Contact Supplier

Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
RC0630-3-1465
Work Limit
D1>0.2mm D1>0.7mm
Suitable for Use
Wire Winding of Fine Coil and Thin Coil
Transport Package
20PCS/Box
Specification
RC0330-3-0607
Trademark
KIMCHEN
Origin
China
HS Code
847990000
Production Capacity
10000PCS/Week

Product Description

Ruby nozzle: The product is made of stainless steel and ruby by precise processing and combination. The rigidity of ruby is above than the level 9 and is just less than that of diamond. It is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and long-term continual work to ensure the high insulation of wire coil suffers no hurt.

Features:
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.

Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness. See the measurements drawing to confirm your nozzles measurements according to your winding machine and coil products.

Processing limit: D1≥ 0.2mm, D1≥ 0.7mm.
Sapphire Nozzles(Ruby nozzle)
Outside diameter: 0.60 ~ 20.00mm, tolerance: 0.004 ~ 0.03mm
Inner diameter: 0.04 ~ 12.00mm, tolerance: 0.003 ~ 0.10mm
Length: 0.40 ~ 15.00mm, tolerance: 0.02 ~ 0.10mm
Taper: Custom design, tolerance: +/-3°
Surface roughness: Rz0.05~Rz0.2
We offer other specifications and special products according to your requirements.
Series of fixing dimension Ø2
Serial Model Specification (mm)
L L1 D D1 d1 d2 H
1 RC0326-2-1006 26 6 2 1.0 0.3 0.6 N/A
2 RC0326-2-0806 26 6 2 0.8 0.3 0.6 N/A
3 RC0330-2-0807 30 7 2 0.8 0.3 0.4 N/A
4 RC0335-2-0810 35 10 2 0.8 0.3 0.4 N/A
5 RC0535-2-1008 35 8 2 1.0 0.5 0.5 N/A
6 RC0535-2.5-1411 35 11 2.5 1.4 0.5 0.8 N/A
7 RC0336-2.5-1011 36 11 2.5 1.0 0.3 0.6 N/A
8 RR0635-2-1610 35 10 2 1.6 0.6 0.8 N/A
9 RS0535-2.5-1210 35 10 2.5 1.2 0.5 0.8 N/A
10 RC0530-2-1208 30 8 2 1.2 0.5 0.6 N/A
10 RS0830-2 30 N/A 2 2 0.8 0.8 N/A
 
Series of fixing dimension Ø3
Serial Model Specification(mm)
L L1 D D1 d1 d2 H
1 RC0330-3-1007 30 7 3 1.0 0.3 0.8 N/A
2 RC0330-3-0807 30 7 3 0.8 0.3 0.6 N/A
3 RC0430-3-1210 30 10 3 1.2 0.4 0.6 N/A
4 RC0530-3-1311 30 11 3 1.3 0.5 0.8 N/A
5 RC0630-3-1511 30 11 3 1.5 0.6 0.8 N/A
6 RC0323-3-1007P 23 7 3 1.0 0.3 0.8 16
7 RC0511-3-1506P 11 6 3 1.5 0.5 0.6 5
8 RC0514-3-1509P 14 9 3 1.5 0.5 0.6 5
9 RC0311-3-1006P 11 6 3 1.0 0.3 0.6 5
10 RC0314-3-1009P 14 9 3 1.0 0.3 0.6 5
11 RC0530-3-1455 30 5.5 3 1.4 0.5 0.6 N/A
12 RC0530-3-1465 30 6.5 3 1.4 0.5 0.6 N/A
13 RC0330-3-1535P 30 3.5 3 1.5 0.3 0.5 13
14 RC0330-3-1012 30 12 3 1.0 0.3 0.6 N/A
15 RS0821-3-2015P 21 15 3 2.0 0.8 1.0 6
16 RC0615-3-1505 15 5 3 1.5 0.6 0.6 N/A
17 RC0530-3-2014 30 14 3 2.0 0.5 0.5 N/A
18 RC0426-3-1208 26 8 3 1.2 0.4 0.6 N/A
19 RC0317-3-0812 17 12 3 0.8 0.3 0.4 N/A
20 RC0414-3-1309 14 9 3 1.3 0.4 0.6 N/A
21 RC0314-3-1015 14 1.5 3 1.0 0.3 0.6 N/A
22 RR0314-3-1003 14 3 3 1.0 0.3 0.5 N/A
23 RC03186-3-0805 18.6 5 3 0.8 0.3 0.4 N/A
24 RC0334-3-1035P 34 3.5 3 1.0 0.3 0.6 8
25 RC1030-3-2514 30 14 3 2.5 1.0 1.2 N/A
26 RS0522-3-1608P 22 8 3 1.6 0.5 0.8 14
27 RC0422-3-1208P 22 8 3 1.2 0.4 0.6 14
28 RS1030-3-20145 30 14.5 3 2.0 1.0 1.2 N/A
29 RS08115-3-2006P 11.5 6 3 2.0 0.8 1.1 5
30 RS15115-3P 11.5 N/A 3 N/A 1.5 2.0 5.5
31 RR08115-3-2055P 11.5 5.5 3 2.0 0.8 0.8 6
32 RR08145-3-2085P 14.5 8.5 3 2 0.8 0.8 6
33 RR10105-3 10.5 N/A 3 N/A 1.0 1.0 N/A
34 RR1014-3 14 N/A 3 N/A 1.0 1.0 N/A
35 RC1030-3-2013 30 13 3 2.0 1.0 1.0 N/A
36 RC0825-3-2520 25 20 3 2.5 0.8 1.0 N/A
37 RC0829-3-2015 29 15 3 2 0.8 1.2 N/A
38 RS0626-3-1420 26 20 3 1.4 0.6 0.8 N/A
39 RS0625-3-2520 25 20 3 2.5 0.6 0.8 N/A
40 RC0430-3-1065 30 6.5 3 1.0 0.4 0.6 N/A
41 RC0630-3-1465 30 6.5 3 1.4 0.6 0.8 N/A
42 RC0545-3-1315 45 15 3 1.3 0.5 0.6 N/A
43 RC0530-3-1006 30 6 3 1.0 0.5 0.8 N/A
44 RC0630-3-1406 30 6 3 1.4 1.2 0.6 N/A
 
Series of fixing dimension Ø4
Serial Model Specification(mm)
L L1 D D1 d1 d2 H
1 RC0843-4-2014P 43 14 4 2.0 0.8 0.8 20
2 RS0843-4-2014P 43 14 4 2.0 0.8 1.0 20
3 RC0330-4-1515 30 15 4 1.5 0.3 0.6 N/A
4 RC0330-4-1415 30 15 4 1.4 0.3 0.5 N/A
5 RC0340-4-1006 40 6 4 1.0 0.3 0.6 N/A
6 RC0330-4-1415 30 15 4 1.4 0.3 0.6 N/A
7 RC1043-4-2514P 43 14 4 2.5 1.0 1.2 20
8 RS1230-4-2515 30 15 4 2.5 1.2 1.5 N/A
9 RC0343-4-1006 43 6 4 1.0 0.3 0.6 19
10 RS08285-4-2015 28.5 15 4 2.0 0.8 1.2 N/A
11 RS0643-4-1515 43 15 4 1.5 0.6 1.0 20

Send your message to this supplier

*From:
*To:
avatar Mrs. Amity
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company
Management System Certification
ISO 9001
OEM/ODM Availability
Yes