Technology and application
1.Mechanical Tensioner in the installation should not be too large to force rotation, will affect the degree of mosaic pieces of the solid.
2.To prevent falling, and the case will damage the ceramic pieces.
3.Tighten the screws when installing the tension rod to align the axis of plane
4. When the model used does not match the diameter and do not force the
5. Forbidden to join any oil in the damping-wheel. Do not open the self-regulation
6. Frequent replacement of wool circle, line the mouth to prevent clogging
7. Abnormal noise or over the line wheel does not turn, please change, because bearing worn.
8. If the rotation damping wheel slip, please pull the soiled cotton rubbing alcohol damping O-ring inside the wheel, so you can remove the wax inside the wire left in the dirt.
9. Production sites to keep clean, easy to wear a long backlog of dust Tensioner Parts
10. Around the bottom of the tension knob can spin, can not pull down