Magnetic Damper
A. Characteristics of magnetic damper
1. The magnetic damper and name tension controller, tension control or brake, is a constant torque transmission medium of the magnetic field of the device.
Damping disk with magnets, no sliding friction without contact, the service life is long, tension control extremely stable.
2. Installation simple structure, the output torque is convenient adjustment.
3. Structure compact design, small size, can be in all sorts of steady work position.
B. Magnetic damper adjustment methods and use the matters needing attention
1. Recommends that customers will scale value transferred to use 4 or above, if this time tension too large, had better choose a smaller size specifications of damper.
2. If in scale value below 4, may have used the pulse of the force. Please click HouXiang 3 stated way eliminate pulse.
3. Loosen screw, will turn to 10, turn the scale axis at the same time slow will scale turn to 0, and then turn to
Scale needed to tighten lock screw, value.
4. If use appeared in the process of tension, please repeat the above phenomenon pulsation adjustment method 3 steps until the satisfied tension.
5. Damper magnet produce media magnetic field, use material, the use of large brittle do not open it, lest attaint parts.
| Model |
Applied wire diamiter(mm) |
Tension scope(cn) |
| MTB-02 |
φ 0.03_ φ 0.8 |
0g_ 60 g |
| MTB-03 |
φ 0.08_ φ 0.16 |
10g_ 150 g |
| MTB-04 |
φ 0.16_ φ 0.50 |
50g_ 600 g |
| MTB-05 |
φ 0.50_ φ 1.00 |
500g_ 1400g |
| MTB-06 |
φ 1.00_ φ 2.5 |
500g_ 2500g |
| MTB-07 |
φ 2.00_ φ 4.00 |
600g_ 4100g |
Company Profile
KIM CHEN INDUSTRY INTL LIMITED was founded in 2001, It is located in Dongguan City.
We specialize in the manufacture and RD of the component which is used in coil of wire and tension systems, textile machinery and electrical industry Precision Ceramics, automatic lathe products, precision machining manufacturing and water jet technology. Our company has more than 100 employees, of which nearly 20 technical staff.
With a strong technical force, professional processing equipment, we devote ourselves and development of the component which is used in coil of wire. We have accumulated rich processing experience in the Deep-processing of the super-hard alloy, Crystal Gem and Precision Ceramic. Our technology is improving day by day...We can be tailored to customer specifications of the various nozzles. Various products have been widely used in various types of electronics, machinery, textile and other equipment, its excellent performance and the reliable quality has fully met the international standards; One of the parts of precision grinding technology and quality standards even more than the international peer level.
After a few years development of the coil winding tension system and the production of the two series of 10multiple specifications tensioner, after the listing of products, we gain customer recognition with an annual output-5, 000 sets. At the same time we are exploring the development of new industrial categories, through the introduction of advanced international machine tool equipment, we have a certain production scale in the field of automatic lathe products, therefore we have the ability to undertake all types of non-standard nut (column), posts and large quantities of shaft processing with the stable and reliable product quality.
We manufacture only No Lead Green Products to protect our environment in order to fulfill our moral responsibility as a member of this earth.
We always adhere to quality first, technology first, service first, customer first to pragmatic, scientific management, innovation and integrity, excellence, management philosophy. The company not only selling products all over the country and exported to Southeast Asia, the Middle East, Europe and more than 20 countries and regions. In the companys leadership and staff of the joint efforts of the rapid development of the gold honesty KIM CHEN INDUSTRY INTL LIMITED. Sincerely hope to strong technical advantage, advanced management, quality performance and perfect after-sales service and work closely with customers home and abroad hand in hand, create brilliant future!
Continuous Development and Conscious Operation is our long term goal. We hope to develop properous collaboration with you in the future.
Certifications
Our Advantages
1:Nice Price with Nice Quality
2:Fast and best serive
3:Fast Delivery
4: Professional Experierence
5:Strong and Good package
FAQ
1.Q:Are you a factory or trading company?
A:We are a professional manufacturer.
2.Q:Where is your factory located?
A:Our factory is located in Dongguan, Guangdong Province.
3.Q:How can I get a sample to test your quality?
A:The sample is available,for more detail, welcome to talk with us.
4.Q:How about your payment method?
A:TT,Paypal ,Online
5.Q:When can you deliver the goods?
A:If stock available, we can deliver it within 2 days. If not, that would be 5-7 working days after confirm the order.
6.Q:Does your company accept OEM or ODM production?
A:Yes, we are experienced in operating OEM & ODM, just send the detailed requirements.
7:Q: How about the delivery method?
Goods are usually shipped by air or sea via DHL,UPS,FEDEX,TNT. If you have a warehouse in China, we can also deliver the goods to your warehouse.
8:Q: What is your main product?
A: We are support one-stop winding parts,for more product, demand, welcome to send inquiry and contact us ,thank you .
){kind=link}