Coil Winding Machinemachine Spare Part Electronic Tensioner by Real Tension Display

• Customization: Available
• After-sales Service: on Line
• Warranty: 6 Months
• Model NO.: ETA
• Voltage: 24V
• Automatic: Automatic
• Certification: ISO
• Tension Scope: 10-100g
• Tension Wire: 0.04-0.12mm
• Characteristic: Can Choice RS485 Communication
• Tension Control: Closed-Loop
• Displayed: OLED Screen
• Alarm Function: Yes
• Accuracy of Tension: +/-2%
• Transport Package: Package
• Specification: ETA-100
• Trademark: Kimchen
• Origin: China
• Production Capacity: 3000PCS/Month

Product Description

ETA 100g -2000g tension Winding Machinery Hardware Coil Winding Electronic Tensioner

Product Description

ETA series products are developed to realize closed-loop control, the auto-control accuracy of tension is ± 2% of the full scope, and it also equips with multiple tension setting functions, the actual tension output can be exactly the same as whatever tension being set to achieve the intelligent control, and the real-time tension value can be displayed on OLED screen. The tension is controlled by excitation current which is more accurate and stable without impacting from winding speed.

ETA ElectronicnTensioner Characteristic:
1: Auto-Adjustment system without manual intervention by using closed-loop tension control, which can keep the actual winding tension consistent with setting tension.                     

2:No external impact from physical friction force, and the accuracy of the tension control is ± 2% of the full scope

3:Equip with an OLED screen which is easy and convenient to use

4:The hooking tension and the winding tension can be freely switched by the external input signal per the tension being set on.

5:It is easy to do the setup by just inputting the tension number required, dramatically improving the machine setup efficiency.

6:Using Modbus RTU (485) communication protocol that can realize network communication, can access the real-time tension data through the PLC, PC, and other industrial equipment, as well as the target tension setup

7:Equip with a speed sensor to have the function of checking the real-time winding speed

8:Equip with alarm function for better tension control per the specification being set on (Upper and lower limitation), as well as the wire broken alarm function, and the alarm function can be set up on the Menu.

       

Model number	Tension scope	Applied wire diamiter
ETA-100/L-R	10g-100g	0.04--0.12mm
ETA-200L/R	15g-200g	0.06--0.16mm
ETA-300L/R	30g-300g	0.08--0.25mm
ETA-500L/R	60-500g	012-0.35mm
ETA-1000L/R	100-1000g	0.15-0.45mm
ETA-1500L/R	150-1500g	0.2-0.5mm
ETA-2000L/R	200-2000g	0.3-0.6mm

PRODUCT APPLICATION:

Company Profile

KIM CHEN INDUSTRY INTL LIMITED was founded in 2001, It is located in Dongguan City.

We specialize in the manufacture and RD of the component which is used in coil of wire and tension systems, textile machinery and electrical industry Precision Ceramics, automatic lathe products, precision machining manufacturing and water jet technology. Our company has more than 100 employees, of which nearly 20 technical staff.

With a strong technical force, professional processing equipment, we devote ourselves and development of the component which is used in coil of wire. We have accumulated rich processing experience in the Deep-processing of the super-hard alloy, Crystal Gem and Precision Ceramic. Our technology is improving day by day...We can be tailored to customer specifications of the various nozzles. Various products have been widely used in various types of electronics, machinery, textile and other equipment, its excellent performance and the reliable quality has fully met the international standards; One of the parts of precision grinding technology and quality standards even more than the international peer level.

After a few years development of the coil winding tension system and the production of the two series of 10multiple specifications tensioner, after the listing of products, we gain customer recognition with an annual output-5, 000 sets. At the same time we are exploring the development of new industrial categories, through the introduction of advanced international machine tool equipment, we have a certain production scale in the field of automatic lathe products, therefore we have the ability to undertake all types of non-standard nut (column), posts and large quantities of shaft processing with the stable and reliable product quality.

We manufacture only No Lead Green Products to protect our environment in order to fulfill our moral responsibility as a member of this earth.

We always adhere to quality first, technology first, service first, customer first to pragmatic, scientific management, innovation and integrity, excellence, management philosophy. The company not only selling products all over the country and exported to Southeast Asia, the Middle East, Europe and more than 20 countries and regions. In the companys leadership and staff of the joint efforts of the rapid development of the gold honesty KIM CHEN INDUSTRY INTL LIMITED. Sincerely hope to strong technical advantage, advanced management, quality performance and perfect after-sales service and work closely with customers home and abroad hand in hand, create brilliant future!

Continuous Development and Conscious Operation is our long term goal. We hope to develop properous collaboration with you in the future.

Certifications

Our Advantages

1:Nice Price with Nice Quality
2:Fast and best serive
3:Fast Delivery 
4: Professional Experierence 
5:Strong and Good package

FAQ

1.Q:Are you a factory or trading company?
A:We are a professional manufacturer.

2.Q:Where is your factory located?
A:Our factory is located in Dongguan, Guangdong Province.

3.Q:How can I get a sample to test your quality?
A:The sample is available,for more detail, welcome to talk with us.

4.Q:How about your payment method?
A:TT,Paypal ,Online

5.Q:When can you deliver the goods?
A:If stock available, we can deliver it within 2 days. If not, that would be 5-7 working days after confirm the order.

6.Q:Does your company accept OEM or ODM production?
A:Yes, we are experienced in operating OEM & ODM, just send the detailed requirements.

7:Q: How about the delivery method?
Goods are usually shipped by air or sea via DHL,UPS,FEDEX,TNT. If you have a warehouse in China, we can also deliver the goods to your warehouse.

8:Q: What is your main product?
A: We are support one-stop winding parts,for more product, demand, welcome to send inquiry and contact us ,thank you .

Welcome to send inquiry to us, we will provide professional service and solution to you asap.