Wear-Resistant Tungsten Carbide Eyelets TC Eyelets for Cable Industry
Product Description
Tungsten Carbide Eyelet coil winding nozzle guide is made by the precision machining with the tungsten carbide materials (Super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm.
Any size and drawing will be welcome, we can make it according to customer's drawing.
Want to know more about Tungsten Carbide Eyelet coil winding nozzle guide, please contact us as soon as possible.
Ruby tiped coil winding nozzle guides Features:
1.High Wear Resistance
This is assured by the choice of materials for wear elements possessing.Hardness Value:1800 ~ 2200Vickers, or 3times that of case hardened steel.Body material is stainless steel for structural supports, not wear-bearing.
2.Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension.The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3.Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating?.In plain terms, the wire should exit from the nozzle concentric to the locating?To within 0.02 mm, with or without load.A geometric characteristic presentation is shown at upper left.Concentricity to within 0.01mm.
4.Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm.This is done by digital measurement, shown at upper right.
Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness.See the measurements drawing to confirm your nozzles measurements according to your winding machine and coil products.
Processing limit:D1≥ 0.2mm, D1≥ 0.7mm.
| Series of fixing dimension Ø2 |
| Serial |
Model |
Specification (mm ) |
| L |
L1 |
D |
d1 |
D1 |
D2 |
H |
| 1 |
RC0326-2-1006 |
26 |
6 |
2 |
1.0 |
0.3 |
0.6 |
N/A |
| 2 |
RC0326-2-0806 |
26 |
6 |
2 |
0.8 |
0.3 |
0.6 |
N/A |
| 3 |
RC0330-2-0807 |
30 |
7 |
2 |
0.8 |
0.3 |
0.4 |
N/A |
| 4 |
RC0335-2-0810 |
35 |
10 |
2 |
0.8 |
0.3 |
0.4 |
N/A |
| 5 |
RC0535-2-1008 |
35 |
8 |
2 |
1.0 |
0.5 |
0.5 |
N/A |
| 6 |
RC0535-2.5-1411 |
35 |
11 |
2.5 |
1.4 |
0.5 |
0.8 |
N/A |
| 7 |
RC0336-2.5-1011 |
36 |
11 |
2.5 |
1.0 |
0.3 |
0.6 |
N/A |
| 8 |
RR0635-2-1610 |
35 |
10 |
2 |
1.6 |
0.6 |
0.8 |
N/A |
| 9 |
RS0535-2.5-1210 |
35 |
10 |
2.5 |
1.2 |
0.5 |
0.8 |
N/A |
| 10 |
RC0530-2-1208 |
30 |
8 |
2 |
1.2 |
0.5 |
0.6 |
N/A |
| 10 |
RS0830-2 |
30 |
N/A |
2 |
2 |
0.8 |
0.8 |
N/A |
| Series of fixing dimension Ø3 |
| Serial |
Model |
Specification ( mm ) |
| L |
L1 |
D |
d1 |
D1 |
D2 |
H |
| 1 |
RC0330-3-1007 |
30 |
7 |
3 |
1.0 |
0.3 |
0.8 |
N/A |
| 2 |
RC0330-3-0807 |
30 |
7 |
3 |
0.8 |
0.3 |
0.6 |
N/A |
| 3 |
RC0430-3-1210 |
30 |
10 |
3 |
1.2 |
0.4 |
0.6 |
N/A |
| 4 |
RC0530-3-1311 |
30 |
11 |
3 |
1.3 |
0.5 |
0.8 |
N/A |
| 5 |
RC0630-3-1511 |
30 |
11 |
3 |
1.5 |
0.6 |
0.8 |
N/A |
| 6 |
RC0323-3-1007P |
23 |
7 |
3 |
1.0 |
0.3 |
0.8 |
16 |
| 7 |
RC0511-3-1506P |
11 |
6 |
3 |
1.5 |
0.5 |
0.6 |
5 |
| 8 |
RC0514-3-1509P |
14 |
9 |
3 |
1.5 |
0.5 |
0.6 |
5 |
| 9 |
RC0311-3-1006P |
11 |
6 |
3 |
1.0 |
0.3 |
0.6 |
5 |
| 10 |
RC0314-3-1009P |
14 |
9 |
3 |
1.0 |
0.3 |
0.6 |
5 |
| 11 |
RC0530-3-1455 |
30 |
5.5 |
3 |
1.4 |
0.5 |
0.6 |
N/A |
| 12 |
RC0530-3-1465 |
30 |
6.5 |
3 |
1.4 |
0.5 |
0.6 |
N/A |
| 13 |
RC0330-3-1535P |
30 |
3.5 |
3 |
1.5 |
0.3 |
0.5 |
13 |
| 14 |
RC0330-3-1012 |
30 |
12 |
3 |
1.0 |
0.3 |
0.6 |
N/A |
| 15 |
RS0821-3-2015P |
21 |
15 |
3 |
2.0 |
0.8 |
1.0 |
6 |
| 16 |
RC0615-3-1505 |
15 |
5 |
3 |
1.5 |
0.6 |
0.6 |
N/A |
| 17 |
RC0530-3-2014 |
30 |
14 |
3 |
2.0 |
0.5 |
0.5 |
N/A |
| 18 |
RC0426-3-1208 |
26 |
8 |
3 |
1.2 |
0.4 |
0.6 |
N/A |
| 19 |
RC0317-3-0812 |
17 |
12 |
3 |
0.8 |
0.3 |
0.4 |
N/A |
| 20 |
RC0414-3-1309 |
14 |
9 |
3 |
1.3 |
0.4 |
0.6 |
N/A |
| 21 |
RC0314-3-1015 |
14 |
1.5 |
3 |
1.0 |
0.3 |
0.6 |
N/A |
| 22 |
RR0314-3-1003 |
14 |
3 |
3 |
1.0 |
0.3 |
0.5 |
N/A |
| 23 |
RC03186-3-0805 |
18.6 |
5 |
3 |
0.8 |
0.3 |
0.4 |
N/A |
| 24 |
RC0334-3-1035P |
34 |
3.5 |
3 |
1.0 |
0.3 |
0.6 |
8 |
| 25 |
RC1030-3-2514 |
30 |
14 |
3 |
2.5 |
1.0 |
1.2 |
N/A |
| 26 |
RS0522-3-1608P |
22 |
8 |
3 |
1.6 |
0.5 |
0.8 |
14 |
| 27 |
RC0422-3-1208P |
22 |
8 |
3 |
1.2 |
0.4 |
0.6 |
14 |
| 28 |
RS1030-3-20145 |
30 |
14.5 |
3 |
2.0 |
1.0 |
1.2 |
N/A |
| 29 |
RS08115-3-2006P |
11.5 |
6 |
3 |
2.0 |
0.8 |
1.1 |
5 |
| 30 |
RS15115-3P |
11.5 |
N/A |
3 |
N/A |
1.5 |
2.0 |
5.5 |
| 31 |
RR08115-3-2055P |
11.5 |
5.5 |
3 |
2.0 |
0.8 |
0.8 |
6 |
| 32 |
RR08145-3-2085P |
14.5 |
8.5 |
3 |
2 |
0.8 |
0.8 |
6 |
| 33 |
RR10105-3 |
10.5 |
N/A |
3 |
N/A |
1.0 |
1.0 |
N/A |
| 34 |
RR1014-3 |
14 |
N/A |
3 |
N/A |
1.0 |
1.0 |
N/A |
| 35 |
RC1030-3-2013 |
30 |
13 |
3 |
2.0 |
1.0 |
1.0 |
N/A |
| 36 |
RC0825-3-2520 |
25 |
20 |
3 |
2.5 |
0.8 |
1.0 |
N/A |
| 37 |
RC0829-3-2015 |
29 |
15 |
3 |
2 |
0.8 |
1.2 |
N/A |
| 38 |
RS0626-3-1420 |
26 |
20 |
3 |
1.4 |
0.6 |
0.8 |
N/A |
| 39 |
RS0625-3-2520 |
25 |
20 |
3 |
2.5 |
0.6 |
0.8 |
N/A |
| 40 |
RC0430-3-1065 |
30 |
6.5 |
3 |
1.0 |
0.4 |
0.6 |
N/A |
| 41 |
RC0630-3-1465 |
30 |
6.5 |
3 |
1.4 |
0.6 |
0.8 |
N/A |
| 42 |
RC0545-3-1315 |
45 |
15 |
3 |
1.3 |
0.5 |
0.6 |
N/A |
| 43 |
RC0530-3-1006 |
30 |
6 |
3 |
1.0 |
0.5 |
0.8 |
N/A |
| 44 |
RC0630-3-1406 |
30 |
6 |
3 |
1.4 |
1.2 |
0.6 |
N/A |
| Series of fixing dimension Ø4 |
| Serial |
Model |
Specification ( mm ) |
| L |
L1 |
D |
d1 |
D1 |
D2 |
H |
| 1 |
RC0843-4-2014P |
43 |
14 |
4 |
2.0 |
0.8 |
0.8 |
20 |
| 2 |
RS0843-4-2014P |
43 |
14 |
4 |
2.0 |
0.8 |
1.0 |
20 |
| 3 |
RC0330-4-1515 |
30 |
15 |
4 |
1.5 |
0.3 |
0.6 |
N/A |
| 4 |
RC0330-4-1415 |
30 |
15 |
4 |
1.4 |
0.3 |
0.5 |
N/A |
| 5 |
RC0340-4-1006 |
40 |
6 |
4 |
1.0 |
0.3 |
0.6 |
N/A |
| 6 |
RC0330-4-1415 |
30 |
15 |
4 |
1.4 |
0.3 |
0.6 |
N/A |
| 7 |
RC1043-4-2514P |
43 |
14 |
4 |
2.5 |
1.0 |
1.2 |
20 |
| 8 |
RS1230-4-2515 |
30 |
15 |
4 |
2.5 |
1.2 |
1.5 |
N/A |
| 9 |
RC0343-4-1006 |
43 |
6 |
4 |
1.0 |
0.3 |
0.6 |
19 |
| 10 |
RS08285-4-2015 |
28.5 |
15 |
4 |
2.0 |
0.8 |
1.2 |
N/A |
| 11 |
RS0643-4-1515 |
43 |
15 |
4 |
1.5 |
0.6 |
1.0 |
20 |
Company Profile
KIM CHEN INDUSTRY INTL LIMITED was founded in 2001, It is located in Dongguan City.
We specialize in the manufacture and RD of the component which is used in coil of wire and tension systems, textile machinery and electrical industry Precision Ceramics, automatic lathe products, precision machining manufacturing and water jet technology. Our company has more than 100 employees, of which nearly 20 technical staff.
With a strong technical force, professional processing equipment, we devote ourselves and development of the component which is used in coil of wire. We have accumulated rich processing experience in the Deep-processing of the super-hard alloy, Crystal Gem and Precision Ceramic. Our technology is improving day by day...We can be tailored to customer specifications of the various nozzles. Various products have been widely used in various types of electronics, machinery, textile and other equipment, its excellent performance and the reliable quality has fully met the international standards; One of the parts of precision grinding technology and quality standards even more than the international peer level.
After a few years development of the coil winding tension system and the production of the two series of 10multiple specifications tensioner, after the listing of products, we gain customer recognition with an annual output-5, 000 sets. At the same time we are exploring the development of new industrial categories, through the introduction of advanced international machine tool equipment, we have a certain production scale in the field of automatic lathe products, therefore we have the ability to undertake all types of non-standard nut (column), posts and large quantities of shaft processing with the stable and reliable product quality.
We manufacture only No Lead Green Products to protect our environment in order to fulfill our moral responsibility as a member of this earth.
We always adhere to quality first, technology first, service first, customer first to pragmatic, scientific management, innovation and integrity, excellence, management philosophy. The company not only selling products all over the country and exported to Southeast Asia, the Middle East, Europe and more than 20 countries and regions. In the companys leadership and staff of the joint efforts of the rapid development of the gold honesty KIM CHEN INDUSTRY INTL LIMITED. Sincerely hope to strong technical advantage, advanced management, quality performance and perfect after-sales service and work closely with customers home and abroad hand in hand, create brilliant future!
Continuous Development and Conscious Operation is our long term goal. We hope to develop properous collaboration with you in the future.
Certifications
Our Advantages
1:Nice Price with Nice Quality
2:Fast and best serive
3:Fast Delivery
4: Professional Experierence
5:Strong and Good package
FAQ
1.Q:Are you a factory or trading company?
A:We are a professional manufacturer.
2.Q:Where is your factory located?
A:Our factory is located in Dongguan, Guangdong Province.
3.Q:How can I get a sample to test your quality?
A:The sample is available,for more detail, welcome to talk with us.
4.Q:How about your payment method?
A:TT,Paypal ,Online
5.Q:When can you deliver the goods?
A:If stock available, we can deliver it within 2 days. If not, that would be 5-7 working days after confirm the order.
6.Q:Does your company accept OEM or ODM production?
A:Yes, we are experienced in operating OEM & ODM, just send the detailed requirements.
7:Q: How about the delivery method?
Goods are usually shipped by air or sea via DHL,UPS,FEDEX,TNT. If you have a warehouse in China, we can also deliver the goods to your warehouse.
8:Q: What is your main product?
A: We are support one-stop winding parts,for more product, demand, welcome to send inquiry and contact us ,thank you .
Welcome to send inquiry to us, we will provide professional service and solution to you asap
){kind=link}